Usage: aria2c [OPTIONS] [URI | MAGNET | TORRENT_FILE | METALINK_FILE]...
Printing options tagged with '#bittorrent'.
See 'aria2c -h#help' to know all available tags.
Options:
--max-overall-download-limit=SPEED Set max overall download speed in bytes/sec.
0 means unrestricted.
You can append K or M(1K = 1024, 1M = 1024K).
To limit the download speed per download, use
--max-download-limit option.
Possible Values: 0-*
Default: 0
Tags: #http, #ftp, #bittorrent
--max-download-limit=SPEED Set max download speed per each download in
bytes/sec. 0 means unrestricted.
You can append K or M(1K = 1024, 1M = 1024K).
To limit the overall download speed, use
--max-overall-download-limit option.
Possible Values: 0-*
Default: 0
Tags: #http, #ftp, #bittorrent
-V, --check-integrity[=true|false] Check file integrity by validating piece
hashes or a hash of entire file. This option has
effect only in BitTorrent, Metalink downloads
with checksums or HTTP(S)/FTP downloads with
--checksum option. If piece hashes are provided,
this option can detect damaged portions of a file
and re-download them. If a hash of entire file is
provided, hash check is only done when file has
been already download. This is determined by file
length. If hash check fails, file is
re-downloaded from scratch. If both piece hashes
and a hash of entire file are provided, only
piece hashes are used.
Possible Values: true, false
Default: false
Tags: #basic, #metalink, #bittorrent, #file, #checksum
--hash-check-only[=true|false] If true is given, after hash check using
--check-integrity option, abort download whether
or not download is complete.
Possible Values: true, false
Default: false
Tags: #advanced, #metalink, #bittorrent, #file, #checksum
-S, --show-files[=true|false] Print file listing of .torrent, .meta4 and
.metalink file and exit. More detailed
information will be listed in case of torrent
file.
Possible Values: true, false
Default: false
Tags: #basic, #metalink, #bittorrent
--max-overall-upload-limit=SPEED Set max overall upload speed in bytes/sec.
0 means unrestricted.
You can append K or M(1K = 1024, 1M = 1024K).
To limit the upload speed per torrent, use
--max-upload-limit option.
Possible Values: 0-*
Default: 0
Tags: #basic, #bittorrent
-u, --max-upload-limit=SPEED Set max upload speed per each torrent in
bytes/sec. 0 means unrestricted.
You can append K or M(1K = 1024, 1M = 1024K).
To limit the overall upload speed, use
--max-overall-upload-limit option.
Possible Values: 0-*
Default: 0
Tags: #basic, #bittorrent
-T, --torrent-file=TORRENT_FILE The path to the .torrent file.
Possible Values: /path/to/file
Tags: #basic, #bittorrent
--listen-port=PORT... Set TCP port number for BitTorrent downloads.
Multiple ports can be specified by using ',',
for example: "6881,6885". You can also use '-'
to specify a range: "6881-6999". ',' and '-' can
be used together.
Possible Values: 1024-65535
Default: 6881-6999
Tags: #basic, #bittorrent
--follow-torrent=true|false|mem If true or mem is specified, when a file
whose suffix is .torrent or content type is
application/x-bittorrent is downloaded, aria2
parses it as a torrent file and downloads files
mentioned in it.
If mem is specified, a torrent file is not
written to the disk, but is just kept in memory.
If false is specified, the .torrent file is
downloaded to the disk, but is not parsed as a
torrent and its contents are not downloaded.
Possible Values: true, mem, false
Default: true
Tags: #bittorrent
--select-file=INDEX... Set file to download by specifying its index.
You can find the file index using the
--show-files option. Multiple indexes can be
specified by using ',', for example: "3,6".
You can also use '-' to specify a range: "1-5".
',' and '-' can be used together.
When used with the -M option, index may vary
depending on the query(see --metalink-* options).
Possible Values: 1-1048576
Tags: #metalink, #bittorrent
--seed-time=MINUTES Specify seeding time in (fractional) minutes.
Also see the --seed-ratio option.
Possible Values: 0.0-*
Tags: #bittorrent
--seed-ratio=RATIO Specify share ratio. Seed completed torrents
until share ratio reaches RATIO.
You are strongly encouraged to specify equals or
more than 1.0 here. Specify 0.0 if you intend to
do seeding regardless of share ratio.
If --seed-time option is specified along with
this option, seeding ends when at least one of
the conditions is satisfied.
Possible Values: 0.0-*
Default: 1.0
Tags: #bittorrent
--peer-id-prefix=PEER_ID_PREFIX Specify the prefix of peer ID. The peer ID in
BitTorrent is 20 byte length. If more than 20
bytes are specified, only first 20 bytes are
used. If less than 20 bytes are specified, random
byte data are added to make its length 20 bytes.
Default: A2-1-31-0-
Tags: #bittorrent
--enable-peer-exchange[=true|false] Enable Peer Exchange extension.
Possible Values: true, false
Default: true
Tags: #bittorrent
--enable-dht[=true|false] Enable IPv4 DHT functionality. It also enables
UDP tracker support. If a private flag is set
in a torrent, aria2 doesn't use DHT for that
download even if ``true`` is given.
Possible Values: true, false
Default: true
Tags: #basic, #bittorrent
--dht-listen-port=PORT... Set UDP listening port used by DHT(IPv4, IPv6)
and UDP tracker. Multiple ports can be specified
by using ',', for example: "6881,6885". You can
also use '-' to specify a range: "6881-6999".
',' and '-' can be used together.
Possible Values: 1024-65535
Default: 6881-6999
Tags: #basic, #bittorrent
--dht-entry-point=HOST:PORT Set host and port as an entry point to IPv4 DHT
network.
Possible Values: HOST:PORT
Tags: #bittorrent
--dht-file-path=PATH Change the IPv4 DHT routing table file to PATH.
Possible Values: /path/to/file
Default: C:/Users/Administrator/.cache/aria2/dht.dat
Tags: #bittorrent
--enable-dht6[=true|false] Enable IPv6 DHT functionality.
Use --dht-listen-port option to specify port
number to listen on. See also --dht-listen-addr6
option.
Possible Values: true, false
Default: false
Tags: #basic, #bittorrent
--dht-listen-addr6=ADDR Specify address to bind socket for IPv6 DHT.
It should be a global unicast IPv6 address of the
host.
Tags: #basic, #bittorrent
--dht-entry-point6=HOST:PORT Set host and port as an entry point to IPv6 DHT
network.
Possible Values: HOST:PORT
Tags: #bittorrent
--dht-file-path6=PATH Change the IPv6 DHT routing table file to PATH.
Possible Values: /path/to/file
Default: C:/Users/Administrator/.cache/aria2/dht6.dat
Tags: #bittorrent
--bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.
If several encryption methods are provided by a
peer, aria2 chooses the lowest one which satisfies
the given level.
Possible Values: plain, arc4
Default: plain
Tags: #bittorrent
--bt-require-crypto[=true|false] If true is given, aria2 doesn't accept and
establish connection with legacy BitTorrent
handshake. Thus aria2 always uses Obfuscation
handshake.
Possible Values: true, false
Default: false
Tags: #bittorrent
--bt-request-peer-speed-limit=SPEED If the whole download speed of every
torrent is lower than SPEED, aria2 temporarily
increases the number of peers to try for more
download speed. Configuring this option with your
preferred download speed can increase your
download speed in some cases.
You can append K or M(1K = 1024, 1M = 1024K).
Possible Values: 0-*
Default: 50K
Tags: #bittorrent
--bt-max-open-files=NUM Specify maximum number of files to open in
multi-file BitTorrent/Metalink downloads
globally.
Possible Values: 1-*
Default: 100
Tags: #bittorrent
--bt-seed-unverified[=true|false] Seed previously downloaded files without
verifying piece hashes.
Possible Values: true, false
Default: false
Tags: #bittorrent
--bt-hash-check-seed[=true|false] If true is given, after hash check using
--check-integrity option and file is complete,
continue to seed file. If you want to check file
and download it only when it is damaged or
incomplete, set this option to false.
This option has effect only on BitTorrent
download.
Possible Values: true, false
Default: true
Tags: #bittorrent, #checksum
--bt-max-peers=NUM Specify the maximum number of peers per torrent.
0 means unlimited.
See also --bt-request-peer-speed-limit option.
Possible Values: 0-*
Default: 55
Tags: #bittorrent
--bt-external-ip=IPADDRESS Specify the external IP address to use in
BitTorrent download and DHT. It may be sent to
BitTorrent tracker. For DHT, this option should
be set to report that local node is downloading
a particular torrent. This is critical to use
DHT in a private network. Although this function
is named 'external', it can accept any kind of IP
addresses.
Possible Values: a numeric IP address
Tags: #bittorrent
-O, --index-out=INDEX=PATH Set file path for file with index=INDEX. You can
find the file index using the --show-files option.
PATH is a relative path to the path specified in
--dir option. You can use this option multiple
times.
Possible Values: INDEX=PATH
Tags: #bittorrent
--bt-tracker-interval=SEC Set the interval in seconds between tracker
requests. This completely overrides interval value
and aria2 just uses this value and ignores the
min interval and interval value in the response of
tracker. If 0 is set, aria2 determines interval
based on the response of tracker and the download
progress.
Possible Values: 0-*
Default: 0
Tags: #bittorrent
--bt-stop-timeout=SEC Stop BitTorrent download if download speed is 0 in
consecutive SEC seconds. If 0 is given, this
feature is disabled.
Possible Values: 0-*
Default: 0
Tags: #bittorrent
--bt-prioritize-piece=head[=SIZE],tail[=SIZE] Try to download first and last
pieces of each file first. This is useful for
previewing files. The argument can contain 2
keywords:head and tail. To include both keywords,
they must be separated by comma. These keywords
can take one parameter, SIZE. For example, if
head=SIZE is specified, pieces in the range of
first SIZE bytes of each file get higher priority.
tail=SIZE means the range of last SIZE bytes of
each file. SIZE can include K or M(1K = 1024, 1M =
1024K). If SIZE is omitted, SIZE=1M is used.
Possible Values: head[=SIZE], tail[=SIZE]
Tags: #bittorrent
--bt-save-metadata[=true|false] Save metadata as .torrent file. This option has
effect only when BitTorrent Magnet URI is used.
The filename is hex encoded info hash with suffix
.torrent. The directory to be saved is the same
directory where download file is saved. If the
same file already exists, metadata is not saved.
See also --bt-metadata-only option.
Possible Values: true, false
Default: false
Tags: #bittorrent
--bt-metadata-only[=true|false] Download metadata only. The file(s) described
in metadata will not be downloaded. This option
has effect only when BitTorrent Magnet URI is
used. See also --bt-save-metadata option.
Possible Values: true, false
Default: false
Tags: #bittorrent
--bt-enable-lpd[=true|false] Enable Local Peer Discovery.
Possible Values: true, false
Default: false
Tags: #bittorrent
--bt-lpd-interface=INTERFACE Use given interface for Local Peer Discovery. If
this option is not specified, the default
interface is chosen. You can specify interface
name and IP address.
Possible Values: interface, IP address
Tags: #bittorrent
--bt-tracker-timeout=SEC Set timeout in seconds.
Possible Values: 1-600
Default: 60
Tags: #bittorrent
--bt-tracker-connect-timeout=SEC Set the connect timeout in seconds to
establish connection to tracker. After the
connection is established, this option makes no
effect and --bt-tracker-timeout option is used
instead.
Possible Values: 1-600
Default: 60
Tags: #bittorrent
--dht-message-timeout=SEC Set timeout in seconds.
Possible Values: 1-60
Default: 10
Tags: #bittorrent
--bt-tracker=URI[,...] Comma separated list of additional BitTorrent
tracker's announce URI. These URIs are not
affected by --bt-exclude-tracker option because
they are added after URIs in --bt-exclude-tracker
option are removed.
Possible Values: URI,...
Tags: #bittorrent
--bt-exclude-tracker=URI[,...] Comma separated list of BitTorrent tracker's
announce URI to remove. You can use special value
'*' which matches all URIs, thus removes all
announce URIs. When specifying '*' in shell
command-line, don't forget to escape or quote it.
See also --bt-tracker option.
Possible Values: URI,... or *
Tags: #bittorrent
--bt-remove-unselected-file[=true|false] Removes the unselected files when
download is completed in BitTorrent. To
select files, use --select-file option. If
it is not used, all files are assumed to be
selected. Please use this option with care
because it will actually remove files from
your disk.
Possible Values: true, false
Default: false
Tags: #bittorrent
--bt-detach-seed-only[=true|false]
Exclude seed only downloads when counting
concurrent active downloads (See -j option).
This means that if -j3 is given and this option
is turned on and 3 downloads are active and one
of those enters seed mode, then it is excluded
from active download count (thus it becomes 2),
and the next download waiting in queue gets
started. But be aware that seeding item is still
recognized as active download in RPC method.
Possible Values: true, false
Default: false
Tags: #bittorrent
--bt-force-encryption[=true|false]
Requires BitTorrent message payload encryption
with arc4. This is a shorthand of
--bt-require-crypto --bt-min-crypto-level=arc4.
If true is given, deny legacy BitTorrent
handshake and only use Obfuscation handshake and
always encrypt message payload.
Possible Values: true, false
Default: false
Tags: #bittorrent
--bt-enable-hook-after-hash-check[=true|false] Allow hook command invocation
after hash check (see -V option) in BitTorrent
download. By default, when hash check succeeds,
the command given by --on-bt-download-complete
is executed. To disable this action, give false
to this option.
Possible Values: true, false
Default: true
Tags: #bittorrent
Refer to man page for more information.
转载请注明原文地址: https://ju.6miu.com/read-11646.html
